Fasteners with the looped head are what we generally call eye nuts. They have the design to receive hooks or ropes. Stainless steel eye nut has been used in different applications and generally comes in oval or round shape. The load-rated eye nuts have a design for vertical lifting. However, they are not suitable for angular lifts. Eyes nuts, which are not load-rated, have been used with tie-downs and guiding wires. These are not ideal for lifting anything.
Stainless steel eye nut made by reputed manufactures is ideal to buy as you depend on them to have reliability while lifting a load.
Specifications of eye nuts
It is good to know about the specifications of eye nuts before you try to purchase them. The specifications include:
● Maximum load capacity
● Bell diameter
● Threaded length
● Inside diameter or width
● Eye section
● Weight
The maximum load that an eye nut can lift is the maximum load capacity. While using it, you should never try to lift a load exceeding the maximum load capacity. The measurement of the part that contains the tap in an eye nut is the bell diameter. Generally, all eye nuts are threaded. However, one can also have untapped eye nuts. The bail diameter is the inside diameter for a round eye nut, and the bail width is that for oval eye nuts.
Materials used for manufacturing eye nuts
There is the use of many materials for the manufacture of eye nuts. It can have manufacture using:
● Aluminum
● Brass
● Bronze
● Steel
● Hardened steel
● Stainless steel
● Titanium
● Proprietary alloys
Aluminum is lighter than steel; however, not so strong. Common copper-base alloys like brass and silicon have been used to manufacture eye nuts. If you use stainless steel eye nuts, then there will not be any necessity for anti-corrosion coatings. One can also find the use of carbon steel and titanium for the manufacture of eye nuts. Eye nuts have anodized, galvanized, or plated with gold, silver, tin, or zinc to have the best of finish. If the eye nuts have black oxide coating, then one can be certain of not having any dimensional changes. On the other hand, a phosphate coating makes the surface corrosion-resistant and best for paints and primers' adhesion.
Features of eye nuts
English units like inches and metric units like millimeters have been used to measure eye nuts' thread size. One can have inch-based eye nuts like 1/4, 5/16, 3/8, 7/17, 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2, and 2 3/4 inches from reputed manufacturers. Fasteners designated as #16, #18, #20, #24 are also commonly available. In metric units, eye nuts are possible to have in M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M25, M26, M27, M28, M30, M32, M33, M35, M36, M38, M40, M42, M48, M56, and M54. It is good to know that an M6 eye nut has a 6mm diameter.
When you desire to have the best stainless steel eye nut, do contact QMH INC. They have years of experience in manufacturing a wide variety of stainless steel hardware. They have been offering the best of products to clients since 1996. Call at 781.312.7242 to place your order.
Comments
Post a Comment